The Bendi model B40i5 works in aisles as narrow as *78鈥� (1.98M), has a basic capacity of 4,000 lbs. (1814kg) at 24鈥� (600mm) load center and has lift heights available to 30鈥� (9.14M). The LP Gas engine provides the ability to run 24/7 without battery changing or charging.聽

The B40i5 is a 4-wheel articulating forklift with dual rear-drive tires and soft-poly front load tires. The hydrostatic drive provides excellent traction and braking, high-speed capability and power to enable climbing steep ramps with loads.聽Three or four stage masts are available making this unit excellent for loading/unloading trailers, containers and highway trailers.聽The B40i5 can work聽inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40i5 does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B40i5 provides聽exceptional control and makes load placement and retrieval superior to the competition.

Maximizes聽Material Handling Productivity

The versatile Bendi B40i5 forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B40i5 has large diameter tires and the truck has great underclearance for聽avoiding floor obstructions. One聽forklift can go from inside the truck to the rack eliminating staging and additional operators and support forklifts.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B40i5 Rear Wheel Drive Narrow Aisle Multipurpose LP Gas Forklift appeared first on AV集中营.

The Bendi model B55AC works in aisles as narrow as *84鈥� (2.13M).聽The B55AC high volume model has a basic capacity of 5,500 lbs. (2495kg) at 24鈥� (600mm) load center and has lift heights available to 30鈥� (9.14M).

The B55AC model is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads.聽Three or four stage masts are available. The B55AC can work聽inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B55AC provides聽exceptional control and makes load placement and retrieval superior to the competition.

Maximizes聽Material Handling Productivity

The versatile Bendi B55AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out,聽while operating in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B55AC has large diameter tires and the truck has great underclearance for聽avoiding floor obstructions. One truck can go from inside the dock to the rack, eliminating staging and additional operators and support forklifts.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B55AC Multi-Purpose Articulating Electric Forklift appeared first on AV集中营.

The Bendi model B30AC/B40AC works in aisles as narrow as *78鈥� (1.98M), has a basic capacity starting at 3,000 lbs. (1361 kg) at 24鈥� (600mm) load center and has lift heights available to 26鈥� (7.92M).

The Bendi B30AC/B40AC聽is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads.聽Three or four stage masts are available making this unit excellent for loading/unloading trailers and containers.聽The B30AC/B40AC聽can also work聽inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B30AC/B40AC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B30AC/B40AC provides聽exceptional control and makes load placement and retrieval superior to the competition.

Maximizes聽Material Handling Productivity

The versatile Bendi B30AC/B40AC聽forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B30AC/B40AC聽has large diameter tires and the truck has great underclearance for聽avoiding floor obstructions.聽This forklift聽can go from inside the聽truck to the rack eliminating staging and additional operators and support forklifts.

*Based on 48鈥� (1200 mm) long x 40鈥� (1000 mm) wide load.

The post B30AC/B40AC Multipurpose Narrow Aisle Articulating Electric Forklift appeared first on AV集中营.

The Bendi model B40AC-HL/B50AC-HL聽works in aisles as narrow as 78鈥�* (1.98M), has a basic starting capacity of 4,400 lbs. (1996 kg) at 24鈥� (600mm) load center and has lift heights available to 41鈥� (12.50M).

The Bendi B40AC-HL/B50AC-HL聽is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.聽聽The B40AC-HL / B50AC-HL聽can work聽inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-HL/B50AC-HL聽does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides聽exceptional control and makes load placement and retrieval superior to the competition.

3-Stage Mast

The new mast has a rigid mounting and as standard a tilting and side shifting carriage.聽 The new design offers increased mast rigidity, capacity and improved visibility.聽 Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast.聽聽 Lowered heights have been reduced and a new mounting position on the 42鈥� (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.聽 Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B40AC-HL/B50AC-HL Multipurpose High Lift Articulating Electric Forklift appeared first on AV集中营.

The Bendi model B40AC-DR / B50AC-DR will stack loads two deep in aisles as narrow as *96鈥� (2.4 M) has a basic starting capacity of 2,500 lbs. (1,136 kg) at 24鈥� (600 mm) load center and has lift heights available to 35鈥� 5鈥� (10.80 M).聽 The reach from face to mast is 52鈥� (1,321 mm) and the integral pantograph reach stroke is 41鈥� (1,041 mm) The B40AC-DR / B50AC-DR has a 33鈥� (838 mm) wide tilting and side shifting fork carriage.

The Bendi B40AC-DR / B50AC-DR is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires.聽聽The B40AC-DR / B50AC-DR can work聽inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-DR / B50AC-DR聽does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides聽exceptional control and makes load placement and retrieval superior to the competition.

3-STAGE MAST

The new mast has a rigid mounting and as standard a tilting and side shifting carriage.聽 The new design offers increased mast rigidity, capacity and improved visibility.聽 Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast.聽聽 Lowered heights have been reduced and a new mounting position on the 48鈥� (1,219 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.聽 Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B40AC-DR/B50 AC-DR Electric Deep Reach Forklift appeared first on AV集中营.

The Bendi model B3/30AC works in aisles as narrow as *72鈥� (1.8M), has a basic capacity of 3,000 lbs. (1361kg) at 24鈥� (600mm) load center and has lift heights available to 30鈥� (9.14M).

The Bendi B3/30AC is a 3-wheel articulating forklift with a single poly front聽drive tire and solid rubber rear tires. Front articulation of聽220掳, narrow mast and a compact front end allow easy聽stacking in Very Narrow Aisles. The B3/30AC can work聽inside and outside on paved surfaces. The B3/30AC does all the jobs of a reach truck in aisles at least 40鈥� (1M) smaller.

Exceptional Performance and Maneuverability

Equipped with the LandActive control and the Landoll DuraSteer^TM聽front wheel hydraulic steering, the B3/30AC provides聽exceptional control and makes load placement and retrieval superior to the competition.

Maximizes聽Material Handling Productivity

The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out,聽while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. All tires on the Bendi B3/30AC are 18鈥� (457mm) diameter and the truck has great under clearance for聽avoiding floor obstructions.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B3/30AC VNA Electric Warehouse Forklift appeared first on AV集中营.

The Bendi model B40VAC works in aisles as narrow as *72鈥� (1.8M), has a basic capacity of 4,000 lbs. (1814 kg) at 24鈥� (600mm) load center and has lift heights available to 30鈥� (9.14M). This high-performance VNA Model has fast travel speeds and can climb steep ramps.聽

The Bendi B40VAC is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking, and power enable climbing steep ramps with loads.聽Three masts are available making this unit excellent for loading/unloading trailers and containers.聽The B40VAC can also work聽inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The Bendi B40VAC does all of the jobs of reach and counterbalanced trucks but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with front wheel hydraulic steering, the B40VAC provides聽exceptional control and makes load placement and retrieval superior to the competition.

Maximizes聽Material Handling Productivity

The versatile Bendi B40VAC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, yet operates in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B40VAC has large diameter tires and has great under clearance for聽avoiding floor obstructions. One聽forklift can go from the聽truck to the rack eliminating staging and additional operators and support forklifts.

*Based on 48鈥� (1200mm) long x 40鈥� (1000mm) wide load.

The post B40VAC VNA Electric Warehouse Forklift appeared first on AV集中营.

Our machines are built at our site in Monaghan 鈥� also home to our parent company Combilift. A state-of-the-art production line, plus extensive R&D facilities enable us to pursue our aim of continual product enhancement, thus giving our customers nothing but the best.

Aisle-Master trucks are tough, versatile and built to last. Designed to withstand heavy-duty use inside and out, each robust VNA articulated forklift truck is manufactured to the highest standards and distributed from our global headquarters in Ireland.

Our innovative products incorporate advanced technology and offer a key range of benefits, including higher reach and load capacity, driver comfort and safety, easy operation and efficient 19.5kw AC motors for low running costs 鈥� all contribute to higher productivity and better, more efficient use of available warehouse capacity.

The post Aisle-Master Electric and LPG Trucks appeared first on AV集中营.